Speed Queen Washing Machines Won't Start: How to Fix It Yourself
If your Speed Queen washer won't start at all, don't worry — this is usually something simple. The most common causes are a tripped breaker, a faulty door switch, or a control board glitch. A power reset fixes the problem about half the time.
⚠️ Safety First
- Always unplug the appliance from the wall before starting any repair work.
- Have towels ready and be prepared for water spills. Keep the floor dry to avoid slipping.
Parts You May Need
Step-by-Step Repair
- 1
Check the power supply
Confirm your Speed Queen washer is properly plugged in. Try a different outlet or plug in a lamp to make sure the outlet works. Check your circuit breaker panel — flip the washer's breaker off and back on.
- 2
Inspect the door latch or switch
Most washers will not start if the door is not fully closed and latched. Open and close the door firmly. Look for anything blocking the latch. Listen for a click when the door closes — no click usually means the latch is worn out.
- 3
Try a hard reset
Unplug your Speed Queen washer from the wall. Wait 60 seconds. Plug it back in. This resets the control board and clears temporary errors. Try starting it again.
- 4
Check the control panel
Make sure the washer is not in a lock mode (like child lock). On most Speed Queen models, you can disable child lock by holding the lock button for 3-5 seconds. Also check if any error codes are showing on the display.
- 5
Inspect the start switch
If none of the above worked, the start switch or control board may be faulty. The start switch is the physical button mechanism — if it feels loose or does not click, it may need replacing. This is an inexpensive part (usually $10-$25) for most Speed Queen washers.
If That Didn't Work
- A faulty control board on your Speed Queen washer could be the root cause, though this is less common.
- Wiring issues between components — loose or corroded connections — can cause intermittent problems.
When to Call a Professional
If a power reset, door switch check, and start switch replacement don't fix your Speed Queen washer, the main control board may need replacing ($100-$200 with labor). Get a quote and compare to the cost of a new unit.
Related Repairs
Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.
If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.
See our full Terms of Service for complete legal details.