🔧RepairItFree

Maytag Washing Machines Smells Bad: How to Fix It Yourself

Bad smells from your Maytag washer are caused by mold and bacteria growing in moisture that sits in the machine between washes. A thorough cleaning of the door seal, detergent dispenser, and drain filter eliminates the smell. This is a free fix.

⚡ Difficulty: Easy⏱ 15-30 minutes💰 Parts cost: $0🔧 Tools: White vinegar, Old toothbrush, Bottle brush

⚠️ Safety First

  • Always unplug the appliance from the wall before starting any repair work.
  • Have towels ready and be prepared for water spills. Keep the floor dry to avoid slipping.

Parts You May Need

Washing Machine Cleaner

~$8-$12

AmazoneBay

Affiliate links — we may earn a small commission at no cost to you.

Step-by-Step Repair

  1. 1

    Run a cleaning cycle

    Run your Maytag washer on the hottest setting with no clothes inside. Add 2 cups of white vinegar or a washing machine cleaning tablet. This kills mold and bacteria that cause the smell.

  2. 2

    Clean the door seal

    Pull back the rubber gasket around the door and wipe the inside with a mix of equal parts water and white vinegar. You will probably find black mold or mildew in the folds. Use an old toothbrush to scrub stubborn spots. This is the main source of bad smells.

  3. 3

    Clean the detergent dispenser

    Remove the detergent drawer from your Maytag washer and soak it in hot water with vinegar. Scrub away any soap buildup or mold. Also clean inside the dispenser housing with a bottle brush.

  4. 4

    Clean the drain filter

    The drain filter catches debris and can harbor bacteria. Open the access panel at the bottom front, place towels down, and slowly remove the filter. Clean it under running water and scrub off any slime or buildup.

  5. 5

    Prevent future smells

    After every wash, leave the door open for a few hours to let the drum dry out. Use HE (high-efficiency) detergent and don't use too much — excess soap creates residue that mold feeds on. Run a cleaning cycle once a month.

If That Didn't Work

  • A faulty control board on your Maytag washer could be the root cause, though this is less common.
  • Wiring issues between components — loose or corroded connections — can cause intermittent problems.

When to Call a Professional

If the steps above don't fix your Maytag washer, a professional repair technician can diagnose the issue quickly. Most repairs cost $100-$250 including parts and labor. If your washer is older than 8-10 years, compare the repair estimate to the cost of a new one.

Related Repairs

Kenmore — F5 Error Code

Easy · 20-30 minutes · $8–$15

Whirlpool — F21 Error Code (Long Drain)

Easy · 15-30 minutes · $0–$25

Samsung — UE Error Code (Unbalanced Load)

Easy · 10-20 minutes · $0

LG — OE Error Code (Drain Error)

Easy · 15-30 minutes · $0–$30

Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.

If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.

See our full Terms of Service for complete legal details.