Maytag Washing Machines Not Draining: How to Fix It Yourself
This is a common issue with Maytag washing machines and can usually be resolved with some basic troubleshooting. Before spending money on a repair, work through these steps — most people can fix this problem themselves.
⚠️ Safety First
- Unplug the washing machine before starting any repair.
- Turn off the water supply valves behind the machine.
- Have towels ready to catch any residual water.
Parts You May Need
Step-by-Step Repair
- 1
Power cycle the device
Turn off your Maytag Washing Machine completely. Unplug it from the power source if applicable. Wait 2-3 minutes, then plug it back in and turn it on. This clears many temporary glitches.
- 2
Check the basics
Verify all connections are secure — power cords, cables, hoses, and accessories. Make sure the device is on a stable, level surface and has adequate ventilation.
- 3
Clean accessible components
Clean all user-accessible parts — filters, vents, ports, and surfaces. Built-up dirt and debris cause a surprising number of device problems.
- 4
Inspect for visible damage
Look the device over carefully for cracks, frayed wires, bent pins, worn gaskets, or other visible damage. Take note of anything unusual.
- 5
Reset to factory defaults if applicable
If your device has a reset option, try it. Check the manual or manufacturer's website for the specific reset procedure for your model.
- 6
Test again and document results
After troubleshooting, test the device. If the problem persists, write down exactly what happens — this information helps a technician diagnose the issue faster.
If That Didn't Work
- The control board may have a glitch — try unplugging the washer for 5 minutes to reset it.
- Wiring between components could be loose or damaged.
- The main control board may need replacement if simpler fixes don't work.
When to Call a Professional
If you've tried the basic troubleshooting steps and the problem persists, there may be an issue with the main control board or motor. Board replacement runs $150-$300 with parts and labor. At that price, compare the repair cost to a new machine, especially if your washer is over 8 years old.
Related Repairs
Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.
If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.
See our full Terms of Service for complete legal details.