🔧RepairItFree

LG Washing Machines Leaking Water: How to Fix It Yourself

A leak from your LG Washing Machine is usually caused by a loose connection, a worn gasket or seal, or a clogged drain. Finding and fixing the source of the leak is usually straightforward and inexpensive.

⚡ Difficulty: Medium30-60 minutes💰 Parts cost: $0-$30🔧 Tools: Phillips screwdriver, Flathead screwdriver, Towels, Pliers

⚠️ Safety First

  • Unplug the washing machine before starting any repair.
  • Turn off the water supply valves behind the machine.
  • Have towels ready to catch any residual water.

Parts You May Need

Replacement Seal/Gasket

~$8-$15

Affiliate links — we may earn a small commission at no cost to you.

Step-by-Step Repair

  1. 1

    Identify where the leak is coming from

    Dry up any standing water, then place paper towels or newspaper around the base of the unit. Run a short cycle and watch carefully to identify exactly where the water is coming from. This is the most important step.

  2. 2

    Check all hose connections

    Inspect every hose connection — inlet, outlet, and drain. Tighten any loose fittings by hand. Look for cracked or worn hoses that need replacement (usually $10-$20).

  3. 3

    Inspect seals and gaskets

    Check the door seal, gaskets, and O-rings. Look for cracks, tears, warping, or buildup. Clean seals with warm soapy water. Replace any that are visibly damaged.

  4. 4

    Check the drain system

    Make sure the drain isn't clogged. Clean any accessible filters or drain traps. A backup in the drain can cause water to overflow from unexpected places.

  5. 5

    Level the unit

    If the unit isn't level, water can pool and leak from places it shouldn't. Use a bubble level on top and adjust the feet until it's even.

  6. 6

    Test and monitor

    After making repairs, run a full cycle and watch for leaks. Place a dry towel underneath to easily spot any remaining drips.

If That Didn't Work

  • The control board may have a glitch — try unplugging the washer for 5 minutes to reset it.
  • Wiring between components could be loose or damaged.
  • The main control board may need replacement if simpler fixes don't work.

When to Call a Professional

If you've tried the basic troubleshooting steps and the problem persists, there may be an issue with the main control board or motor. Board replacement runs $150-$300 with parts and labor. At that price, compare the repair cost to a new machine, especially if your washer is over 8 years old.

Related Repairs

Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.

If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.

See our full Terms of Service for complete legal details.