Sharp Microwaves Light Not Working: How to Fix It Yourself
The light in your Sharp microwave not working is usually just a burned-out bulb. Before replacing the bulb, check the door switch too — it is the button that detects when the door opens. Both are very easy, inexpensive fixes.
⚠️ Safety First
- Always unplug the appliance from the wall before starting any repair work.
- Microwaves contain a high-voltage capacitor that can hold a lethal charge even when unplugged. Do not open the microwave cabinet unless you are experienced with appliance repair. The steps below focus on safe, external fixes.
Parts You May Need
Step-by-Step Repair
- 1
Replace the light bulb
The simplest fix first. On your Sharp microwave, open the door and locate the light bulb cover. On most models, you twist or unclip the cover to remove it. Replace the bulb with the same type (check your manual for the correct wattage). Use an appliance-rated bulb, not a regular household bulb.
- 2
Check the door switch
The light is controlled by a small plunger switch in the door frame. Press it with your finger — the light should turn off. If it does not respond, the switch may be stuck or broken. Clean around it first, then try again.
- 3
Inspect the wiring
If the bulb and switch are fine, unplug the microwave and check the wires running to the light socket. Look for loose connections or damaged wires. A loose connector is an easy fix — just push it back on firmly.
- 4
Replace the light socket
If a new bulb and working switch don't solve it, the socket itself may be corroded or broken. Unplug the microwave, remove the socket (usually 1-2 screws), disconnect the wires, and install a new one. A replacement socket for your Sharp microwave costs about $5-$15.
- 5
Test
Plug the microwave back in and open the door. The light should come on. If it still doesn't work, the issue may be on the control board side, which is more complex — but a non-working light does not affect the microwave's actual operation.
If That Didn't Work
- A faulty control board on your Sharp microwave could be the root cause, though this is less common.
- Wiring issues between components — loose or corroded connections — can cause intermittent problems.
When to Call a Professional
If the steps above don't fix your Sharp microwave, a professional repair technician can diagnose the issue quickly. Most repairs cost $100-$250 including parts and labor. If your microwave is older than 8-10 years, compare the repair estimate to the cost of a new one.
Related Repairs
Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.
If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.
See our full Terms of Service for complete legal details.