🔧RepairItFree

Husqvarna Chainsaws Oiler Not Working: How to Fix It Yourself

This is a common issue with Husqvarna chainsaws and can usually be resolved with some basic troubleshooting. Before spending money on a repair, work through these steps — most people can fix this problem themselves.

Medium20-40 minutesParts: $0-$20

Tools Needed

Scrench (combination screwdriver/wrench)Spark plug wrenchFlat fileBar groove cleaner

Watch the Video

Video guide coming soon! Subscribe to our YouTube channel for repair walkthroughs.

Subscribe on YouTube

⚠️ Safety First

  • Always disconnect the spark plug wire before working on a chainsaw.
  • Wear cut-resistant gloves when handling the chain.
  • Never work on a chainsaw while it is running.
  • Make sure the chain brake is engaged before performing any maintenance.

Before You Start

Parts You May Need

Husqvarna Chainsaw Replacement Parts

~$10-$30

AmazoneBay

Affiliate links — we may earn a small commission at no cost to you.

Step-by-Step Repair

  1. Step 1 of 6
    1

    Power cycle the device

    Turn off your Husqvarna Chainsaw completely. Unplug it from the power source if applicable. Wait 2-3 minutes, then plug it back in and turn it on. This clears many temporary glitches.

  2. Step 2 of 6
    2

    Check the basics

    Verify all connections are secure — power cords, cables, hoses, and accessories. Make sure the device is on a stable, level surface and has adequate ventilation.

  3. Step 3 of 6
    3

    Clean accessible components

    Clean all user-accessible parts — filters, vents, ports, and surfaces. Built-up dirt and debris cause a surprising number of device problems.

  4. Step 4 of 6
    4

    Inspect for visible damage

    Look the device over carefully for cracks, frayed wires, bent pins, worn gaskets, or other visible damage. Take note of anything unusual.

  5. Step 5 of 6
    5

    Reset to factory defaults if applicable

    If your device has a reset option, try it. Check the manual or manufacturer's website for the specific reset procedure for your model.

  6. Step 6 of 6
    6

    Test again and document results

    After troubleshooting, test the device. If the problem persists, write down exactly what happens — this information helps a technician diagnose the issue faster.

You might also like:

If That Didn't Work

  • Old or stale fuel mix is the #1 cause of starting problems — drain and replace with fresh 50:1 mix.
  • The spark plug may be fouled or incorrectly gapped.
  • The bar oil reservoir may be empty, causing the chain to bind.

When to Call a Professional

Chainsaws are safety-critical tools. If you're not comfortable with engine repair, take it to a certified dealer. Carburetor cleaning or adjustment runs $40-$80. If the engine has major issues, a new chainsaw costs $200-$500.

Related Guides

Popular Chainsaws Guides

Stihl Wont Start

Medium20-40 minutes

Stihl Chain Wont Turn

Medium20-40 minutes

EGO Battery Chainsaw Not Starting

Medium20-40 minutes

Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.

If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.

See our full Terms of Service for complete legal details.