🔧RepairItFree

EGO Chainsaws Battery Chainsaw Not Starting: How to Fix It Yourself

When your EGO Chainsaw won't turn on, it's usually something simple — a power issue, a tripped safety switch, or a connection problem. Before panicking, work through these steps. Most of the time, the fix is free.

Medium20-40 minutesParts: $0-$20

Tools Needed

Scrench (combination screwdriver/wrench)Spark plug wrenchFlat fileBar groove cleaner

Watch the Video

Video guide coming soon! Subscribe to our YouTube channel for repair walkthroughs.

Subscribe on YouTube

⚠️ Safety First

  • Always disconnect the spark plug wire before working on a chainsaw.
  • Wear cut-resistant gloves when handling the chain.
  • Never work on a chainsaw while it is running.
  • Make sure the chain brake is engaged before performing any maintenance.

Before You Start

Parts You May Need

Replacement Charging Cable

~$8-$15

AmazoneBay

Affiliate links — we may earn a small commission at no cost to you.

Step-by-Step Repair

  1. Step 1 of 6
    1

    Check the power source

    Make sure the outlet is working by plugging in something else (like a lamp). Check if the power cord is fully plugged in at both ends. For battery-powered devices, make sure the battery is charged and properly seated.

  2. Step 2 of 6
    2

    Look for a reset button

    Many devices have a small reset button (often red or recessed). Check the bottom, back, or side of your chainsaw. Press it firmly. If it clicks, that may have been the problem.

  3. Step 3 of 6
    3

    Check the circuit breaker or fuse

    Go to your electrical panel and check if any breakers have tripped (they'll be in a middle position). Flip any tripped breakers fully off, then back on. For plug-in fuses, check if they need replacement.

  4. Step 4 of 6
    4

    Try a full power cycle

    Unplug the device completely. Wait 2-3 minutes. While unplugged, press and hold the power button for 30 seconds (this drains residual power). Plug it back in and try again.

  5. Step 5 of 6
    5

    Inspect the power cord and connections

    Look for frayed wires, bent prongs, loose connections, or burn marks on the plug. A damaged power cord is a common and inexpensive fix ($10-$20 for most replacement cords).

  6. Step 6 of 6
    6

    Test with a different outlet or power source

    Plug the device into a completely different outlet, preferably on a different circuit in your home. If it works on a different outlet, the problem is with your home's electrical, not the device.

You might also like:

If That Didn't Work

  • Old or stale fuel mix is the #1 cause of starting problems — drain and replace with fresh 50:1 mix.
  • The spark plug may be fouled or incorrectly gapped.
  • The bar oil reservoir may be empty, causing the chain to bind.

When to Call a Professional

Chainsaws are safety-critical tools. If you're not comfortable with engine repair, take it to a certified dealer. Carburetor cleaning or adjustment runs $40-$80. If the engine has major issues, a new chainsaw costs $200-$500.

Related Guides

Popular Chainsaws Guides

Stihl Wont Start

Medium20-40 minutes

Stihl Chain Wont Turn

Medium20-40 minutes

Husqvarna Oiler Not Working

Medium20-40 minutes

Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.

If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.

See our full Terms of Service for complete legal details.