Amana Washing Machines Repair Guides
Free step-by-step repair guides for Amana washing machines.
Won't Start
If your Amana washer won't start at all, don't worry — this is usually something simple. The most common causes are a tripped breaker, a faulty door switch, or a control board glitch. A power reset fixes the problem about half the time.
Won't Drain
When your Amana washer won't drain, the most common cause is a clogged drain filter or a blocked drain hose. Cleaning these out fixes the problem about 80% of the time. It's a free fix that takes about 15 minutes.
Won't Spin
If your Amana washer fills and washes but won't spin, the most likely causes are an unbalanced load, a broken drive belt, or a failed lid/door switch. Start with the simplest fixes first — most people solve this without needing any parts.
Leaking
A leaking Amana washer is usually caused by a worn door gasket, a loose hose connection, or a failing pump seal. The good news: most leaks are inexpensive to fix once you find the source. Start by figuring out where the water is coming from.
Shaking Violently
A Amana washer that shakes violently during the spin cycle is usually not level, has an unbalanced load, or has worn shock absorbers. Leveling the machine is free and fixes the problem most of the time.
Won't Fill With Water
When your Amana washer won't fill with water, check the water supply valves first — they may be partially closed. Clogged inlet screens and a faulty water inlet valve are the other common causes. Most fixes are quick and inexpensive.
Door Won't Open
A Amana washer door that won't open is usually a stuck electronic lock. A simple power reset (unplugging for 5 minutes) fixes this about 60% of the time. If the lock mechanism is physically broken, it's an easy and cheap replacement.
Smells Bad
Bad smells from your Amana washer are caused by mold and bacteria growing in moisture that sits in the machine between washes. A thorough cleaning of the door seal, detergent dispenser, and drain filter eliminates the smell. This is a free fix.
Making Loud Noise
Strange noises from your Amana washer are usually caused by worn bearings, loose parts, or something stuck where it shouldn't be. The type of noise tells you a lot: squealing means a belt or bearing, grinding means metal-on-metal, and rattling means something is loose.
Leaving Clothes Wet
When your Amana washer runs but doesn't perform well, it's usually a maintenance issue rather than a broken part. Cleaning filters, checking vents, and using the right amount of detergent often solves the problem completely.