Roku TV TVs Stuck on Loading Screen: How to Fix It Yourself
Screen problems on your Roku TV TV can range from simple software glitches to hardware issues. The good news is that many screen issues can be fixed without replacing the screen itself.
Tools Needed
Watch the Video
Video guide coming soon! Subscribe to our YouTube channel for repair walkthroughs.
Subscribe on YouTube⚠️ Safety First
- Unplug the TV from the wall outlet before doing any physical troubleshooting.
- TVs contain capacitors that can hold a charge — never open the back panel unless you know what you're doing.
Before You Start
Parts You May Need
Step-by-Step Repair
- Step 1 of 61
Perform a hard restart
Turn the device completely off. For electronics, hold the power button for 15-30 seconds. Wait a minute, then turn it back on. This clears many software-related display issues.
Photo: Perform a hard restart - Step 2 of 62
Check all cable connections
If applicable, check HDMI, display, and power cables. Unplug and firmly replug each one. Try different cables and different ports if available.
Photo: Check all cable connections - Step 3 of 63
Adjust brightness and display settings
The screen may be working but with incorrect settings. Try adjusting brightness. If using a remote, try pressing the Input or Source button to cycle through input sources.
Photo: Adjust brightness and display settings - Step 4 of 64
Test with an external display
If possible, connect to an external monitor or TV. If the external display works fine, the issue is with the device's screen specifically, not the graphics processor.
Photo: Test with an external display - Step 5 of 65
Check for physical damage
Look closely at the screen for cracks, pressure marks, discoloration, or dead spots. Shine a flashlight at the screen — if you can faintly see the image, the backlight may have failed.
Photo: Check for physical damage - Step 6 of 66
Update software/firmware
If the device powers on but the display is acting up, check for software updates. Display glitches are sometimes caused by buggy software and fixed with an update.
Photo: Update software/firmware
You might also like:
If That Didn't Work
- Try a power cycle: unplug the TV, hold the power button on the TV itself for 30 seconds, wait 2 minutes, then plug back in.
- Check all HDMI cables and try different ports.
- Update the TV firmware through the settings menu if available.
When to Call a Professional
If basic troubleshooting doesn't work, the issue may be a faulty power supply board or T-con board. Board replacement costs $100-$300 in parts, and repair labor adds another $100-$200. Given that a new 55-inch TV costs $300-$500, it often makes more sense to replace than repair.
Related Guides
Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.
If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.
See our full Terms of Service for complete legal details.