Kenmore Refrigerators Not Cooling: How to Fix It Yourself
When your Kenmore refrigerator stops cooling, dirty condenser coils are the most common cause. These coils release heat, and when coated in dust, the fridge cannot cool properly. Cleaning them is free and fixes the problem about 60% of the time.
⚠️ Safety First
- Always unplug the appliance from the wall before starting any repair work.
- Move perishable food to a cooler with ice while you work to prevent spoilage.
- Do not touch any internal wiring while the appliance is plugged in. If you are not comfortable with electrical components, call a professional.
Parts You May Need
Step-by-Step Repair
- 1
Check the thermostat setting
Make sure your Kenmore refrigerator temperature is set correctly — 37°F for the fridge and 0°F for the freezer. If someone accidentally bumped the dial or settings, the fridge might be set too warm.
- 2
Clean the condenser coils
Unplug the fridge. The condenser coils are usually at the bottom behind a kick plate or on the back. Use a vacuum and coil brush to remove dust and pet hair. Dirty coils are the #1 reason Kenmore refrigerators stop cooling properly.
- 3
Check the condenser fan
While you're at the bottom with the coils, check the condenser fan. It should spin freely. If it's stuck, makes grinding noises, or doesn't run when the fridge is on, the fan motor needs replacing ($15-$30).
- 4
Check the evaporator fan inside the freezer
Open the freezer and listen for the evaporator fan. If it's not running, cold air can't circulate. The fan is behind the back panel inside the freezer. A replacement fan motor costs about $20-$40 for Kenmore models.
- 5
Wait 24 hours and monitor
After cleaning the coils and checking the fans, plug the fridge back in and put a thermometer inside. Give it 24 hours to reach proper temperature. If it still won't cool, the compressor or sealed system may be the issue — that's a professional repair.
If That Didn't Work
- A faulty control board on your Kenmore refrigerator could be the root cause, though this is less common.
- Wiring issues between components — loose or corroded connections — can cause intermittent problems.
When to Call a Professional
If the steps above don't fix your Kenmore refrigerator, a professional repair technician can diagnose the issue quickly. Most repairs cost $100-$250 including parts and labor. If your refrigerator is older than 8-10 years, compare the repair estimate to the cost of a new one.
Related Repairs
Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.
If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.
See our full Terms of Service for complete legal details.