Instant Pot Instant Pots Not Sealing: How to Fix It Yourself
This is a common issue with Instant Pot instant pots and can usually be resolved with some basic troubleshooting. Before spending money on a repair, work through these steps — most people can fix this problem themselves.
Tools Needed
Watch the Video
Video guide coming soon! Subscribe to our YouTube channel for repair walkthroughs.
Subscribe on YouTube⚠️ Safety First
- Never attempt to force open a pressurized Instant Pot.
- Always ensure the steam has fully released before opening the lid.
- Check the sealing ring and float valve before each use.
Before You Start
Parts You May Need
Step-by-Step Repair
- Step 1 of 61
Power cycle the device
Turn off your Instant Pot Instant Pot completely. Unplug it from the power source if applicable. Wait 2-3 minutes, then plug it back in and turn it on. This clears many temporary glitches.
Photo: Power cycle the device - Step 2 of 62
Check the basics
Verify all connections are secure — power cords, cables, hoses, and accessories. Make sure the device is on a stable, level surface and has adequate ventilation.
Photo: Check the basics - Step 3 of 63
Clean accessible components
Clean all user-accessible parts — filters, vents, ports, and surfaces. Built-up dirt and debris cause a surprising number of device problems.
Photo: Clean accessible components - Step 4 of 64
Inspect for visible damage
Look the device over carefully for cracks, frayed wires, bent pins, worn gaskets, or other visible damage. Take note of anything unusual.
Photo: Inspect for visible damage - Step 5 of 65
Reset to factory defaults if applicable
If your device has a reset option, try it. Check the manual or manufacturer's website for the specific reset procedure for your model.
Photo: Reset to factory defaults if applicable - Step 6 of 66
Test again and document results
After troubleshooting, test the device. If the problem persists, write down exactly what happens — this information helps a technician diagnose the issue faster.
Photo: Test again and document results
You might also like:
If That Didn't Work
- The sealing ring may need to be replaced — they wear out every 12-18 months ($8-$12 for a new one).
- The float valve may be stuck or have food debris preventing it from sealing.
- The anti-block shield above the float valve may be clogged.
When to Call a Professional
Most Instant Pot issues are caused by worn gaskets or dirty valves — cheap and easy fixes. If the heating element or control board has failed, replacement parts can be hard to find. A new Instant Pot costs $60-$100, which is usually more practical than a major repair.
Related Guides
More Instant Pot Instant Pots Guides
Popular Instant Pots Guides
Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.
If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.
See our full Terms of Service for complete legal details.