Samsung Dryers Squeaking: How to Fix It Yourself
Strange noises from your Samsung dryer are usually caused by worn bearings, loose parts, or something stuck where it shouldn't be. The type of noise tells you a lot: squealing means a belt or bearing, grinding means metal-on-metal, and rattling means something is loose.
⚠️ Safety First
- Always unplug the appliance from the wall before starting any repair work.
- Let the appliance cool completely before touching internal components. Heating elements and surrounding metal can cause burns.
- If you have a gas model, turn off the gas supply valve before working. If you smell gas at any point, stop immediately, leave the area, and call your gas company.
Parts You May Need
Step-by-Step Repair
- 1
Identify the type of noise
Listen carefully to your Samsung dryer. Is the noise a squealing, grinding, rattling, or humming? Each type points to a different cause. A squeal usually means a belt or bearing. Grinding means something is rubbing. Rattling means something is loose.
- 2
Check for loose items
Unplug the dryer. Check inside and around the unit for any loose items — coins, screws, utensils, or debris can cause rattling or banging noises. Remove anything you find.
- 3
Level the appliance
An unlevel dryer can vibrate and make a lot of noise. Place a level on top of the unit. Adjust the leveling legs at the bottom by turning them clockwise to raise or counterclockwise to lower. All four feet should be touching the floor firmly.
- 4
Inspect the motor and bearings
If you hear a grinding or squealing that gets worse over time, the motor bearings or drum bearings may be wearing out. On your Samsung dryer, you can usually access these by removing the back or front panel. Worn bearings feel rough when you try to spin the drum by hand.
- 5
Test after inspection
Put the panels back on and plug the dryer in. Run a short cycle and listen. If the noise is gone or reduced, you have found and fixed the issue. If it continues, the motor or bearings may need professional replacement.
If That Didn't Work
- A worn drive belt can cause squealing or squeaking noises.
- Foreign objects (coins, buttons) caught between the drum and tub cause clicking or scraping.
When to Call a Professional
If the noise gets worse or you hear grinding metal on metal, stop using your Samsung dryer to prevent further damage. Bearing replacement can cost $150-$300 with labor. If the motor is failing, compare repair cost to a new unit.
Related Repairs
Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.
If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.
See our full Terms of Service for complete legal details.