🔧RepairItFree

NutriBullet Blenders Not Turning On: How to Fix It Yourself

When your NutriBullet Blender won't turn on, it's usually something simple — a power issue, a tripped safety switch, or a connection problem. Before panicking, work through these steps. Most of the time, the fix is free.

Medium10-20 minutesParts: $0-$15

Tools Needed

Phillips screwdriverWrench or pliersClean towel

Watch the Video

Video guide coming soon! Subscribe to our YouTube channel for repair walkthroughs.

Subscribe on YouTube

⚠️ Safety First

  • Always unplug the blender before troubleshooting or disassembling.
  • Be extremely careful handling blender blades — they are very sharp.

Before You Start

Parts You May Need

NutriBullet Blender Replacement Parts

~$10-$30

AmazoneBay

Affiliate links — we may earn a small commission at no cost to you.

Step-by-Step Repair

  1. Step 1 of 6
    1

    Check the power source

    Make sure the outlet is working by plugging in something else (like a lamp). Check if the power cord is fully plugged in at both ends. For battery-powered devices, make sure the battery is charged and properly seated.

  2. Step 2 of 6
    2

    Look for a reset button

    Many devices have a small reset button (often red or recessed). Check the bottom, back, or side of your blender. Press it firmly. If it clicks, that may have been the problem.

  3. Step 3 of 6
    3

    Check the circuit breaker or fuse

    Go to your electrical panel and check if any breakers have tripped (they'll be in a middle position). Flip any tripped breakers fully off, then back on. For plug-in fuses, check if they need replacement.

  4. Step 4 of 6
    4

    Try a full power cycle

    Unplug the device completely. Wait 2-3 minutes. While unplugged, press and hold the power button for 30 seconds (this drains residual power). Plug it back in and try again.

  5. Step 5 of 6
    5

    Inspect the power cord and connections

    Look for frayed wires, bent prongs, loose connections, or burn marks on the plug. A damaged power cord is a common and inexpensive fix ($10-$20 for most replacement cords).

  6. Step 6 of 6
    6

    Test with a different outlet or power source

    Plug the device into a completely different outlet, preferably on a different circuit in your home. If it works on a different outlet, the problem is with your home's electrical, not the device.

You might also like:

If That Didn't Work

  • The drive coupling (the part that connects the motor to the blade assembly) may be worn out.
  • The motor may have overheated — let it cool for 30 minutes and try again.
  • Check the lid interlock switch — many blenders won't run without the lid properly seated.

When to Call a Professional

Most blender issues involve the blade assembly, drive coupling, or gasket — all cheap parts. If the motor itself has burned out (you'll smell a burning electrical smell), replacement is usually not worth it. A new blender of similar quality costs $40-$100.

Related Guides

Not Turning On Guides for Other Brands

Ninja Not Turning On

Medium10-20 minutes

GE Dryer Not Turning On

Easy10-30 minutes

InSinkErator Not Turning On

Easy5-15 minutes

Lasko Not Turning On

Medium10-20 minutes

Popular Blenders Guides

Ninja Leaking from Bottom

Medium10-20 minutes

Vitamix Motor Overheating

Medium10-20 minutes

Vitamix Blades Not Spinning

Medium10-20 minutes

KitchenAid Not Blending Properly

Medium10-20 minutes

Disclaimer: This guide is for informational and educational purposes only and does not constitute professional repair advice. All repairs are performed at your own risk. RepairItFree.com is not liable for any personal injury, property damage, device damage, voided warranties, or other losses resulting from the use of this information.

If you are unsure about any step — especially anything involving electricity, gas, water, or refrigerant — stop and consult a qualified professional. Your safety is more important than saving money.

See our full Terms of Service for complete legal details.