F10
Oven Error Code F10
What it means and how to fix it
What This Error Means
Runaway temperature — the oven detected a temperature above safe limits. Could be a faulty temperature sensor, relay stuck closed on the control board, or a wiring issue. This is a safety concern.
Repair Guide for This Error
Frigidaire Ovens & Ranges — F10 Error Code (Runaway Temperature)
The F10 error on a Frigidaire oven means the control board detected a runaway oven temperature — the oven is either too hot or the sensor is giving a bad reading. This is a safety alert, so take it seriously. The good news is that 70% of the time it is just a bad temperature sensor (a cheap and easy fix). The other 30% of the time it is the control board.
⚡ Medium⏱ 20-45 minutes💰 $10–$50
View full repair guide →
Other Oven Error Codes
F3Oven temperature sensor open — the oven temperature sensor (thermistor) has failed or its wiring is broken. The oven won't heat properly. Replace the sensor ($15-25).F1Control board error — the oven's electronic control board has detected an internal fault. Try disconnecting power for 5 minutes. If the error returns, the control board needs replacement.F9Door lock error — the oven door lock mechanism is stuck or the door latch switch is faulty. The oven may think it's in self-clean mode. Check the door latch assembly.